Uzay-Zaman





 UZAYZAMAN - SPACETIME


 
Uzay-zaman bükülmesinin iki boyutlu çizimi. Maddenin varlığı, uzayzamanın geometrisini değiştirir. Bu bükülmüş geometri yerçekimi olarak tanımlanır. Şunu gözardı etmemek gerekir ki, şekildeki  çizgiler uzayın bükülmesini değil, bükülmüş uzayzamana uyarlanmışkoordinat sistemini temsil eder. Zira düz bir uzayzamanda beyaz çizgiler de doğrusal olurlardı.

Uzayzaman, uzay ile zamanı "uzay-zaman sürekliliği" adı verilen yapıda birleştiren matematik modeli. Öklitçi yaklaşıma göre evren uzayın üç boyutu ve dördüncü boyutu oluşturan zamandan oluşur. Fizikçiler, uzay ve zaman kavramlarını tek bir çatı altında birleştirmek yoluyla, karmaşık fizik teorilerini önemli ölçüde basitleştirmeyi ve evrenin işleyişini süpergalaktik (Fiziksel Kozmoloji) ve altatomik (atom altı, bkz. Kuantum Fiziği) seviyelerde daha basit ve ortak bir dilde açıklamayı başarmışlardır.

Klasik mekanikte, Öklid uzayı kullanımı, uzay-zamanı kendine mal etmek yerine, "zaman"ı gözlemcinin hareket durumundan bağımsız olarak evrensel ve değişmez gibi kabul edip ele alır. Göreliliğe dayalı bağlamda ise "zaman", uzayın üç boyutundan ayrı olarak düşünülemez; çünkü bir objenin vektörel hızı, ışığın hızı ve bir de güçlü yerçekimsel alanların gücü ile ilişkilidir. Bu yerçekimsel alanlar zamanın ilerleyişini yavaşlatabilir, ve bir o kadar da bağımlıdır gözlemcinin hareket durumuna. Bu nedenle de evrensel değildir.

Evrensel dediğimiz, bir olgunun evrenin her köşesinde doğru ve değişmez olmasıdır. AncakAlbert Einstein'ın kurduğu "Görecelik Kuramı"na göre zaman evrenin her köşesinde aynı değildir ve gözlemciye göre değişir, görecelidir. Örneğin, kütle uzay-zamanda eğrilikler yaratır. Burada zaman bükülür ve bu eğride bulunan bir gözlemciye göre, dışarıda duran bir başka gözlemciden zaman daha yavaş akar. İşte "zaman" burada evrensel değildir.

Bu bükülmeyi şu şekilde açıklayabiliriz: Düz bir yatak düşünün. Bu yatağın üzerine gergin bir çarşaf serin, hiç kırışıklık olmasın. İşte bu dümdüz çarşaf iki boyutla tanımladığımız uzay-zaman düzlemi olsun. Şimdi bu düzleme bir gezegeni simgeleyen demir bir bilye koyun. Bilye yatağa biraz gömülüp bir göçük yaratarak çarşafı da bükecektir. İşte zaman da bu şekilde demir bilye ile simgelediğimiz kütle yardımıyla bükülebilir. Kütlenin artışı, uzay-zaman düzlemini büküşünü arttırır. Kütle arttıkça göçük de artar. Eğer kütle ölçülemeyecek boyutlarda aşırı yüksek olursa uzay-zaman düzlemi ışığı bile hapsedecek kadar göçecektir. İşte bu göçük karadelik olarak adlandırılır. Eğim çok olduğu için ışık karadelikten girer ama geri çıkmaz. Bazı teorilere göre bu içeri giren ışık evrenin başka bir noktasından geri çıkar. Bu teorilerde karadelikler dipsiz kuyular değillerdir, iki ucu açık bir boru gibi düşünülebilir.




In physicsspacetime is any mathematical model that combines space and time into a single continuum. Spacetime is usually interpreted with space being three-dimensional and time playing the role of a fourth dimension that is of a different sort than the spatial dimensions. According to certain Euclidean space perceptions, the universe has threedimensions of space and one dimension of time. By combining space and time into a single manifold, physicists have significantly simplified a large number of physical theories, as well as described in a more uniform way the workings of the universe at both thesupergalactic and subatomic levels.

In classical mechanics, the use of Euclidean space instead of spacetime is appropriate, as time is treated as universal and constant, being independent of the state of motion of an observer. In relativistic contexts, however, time cannot be separated from the three dimensions of space, because the rate at which time passes depends on an object'svelocity relative to the speed of light and also on the strength of intense gravitational fields which can slow the passage of time.

 

Concept with dimensions

The concept of spacetime combines space and time within a single coordinate system, typically with three spatial dimensions: length, width, height, and one temporal dimension: time. Dimensions are components of a coordinate grid typically used to locate a point in a certain defined "space" as, for example, on the globe by latitude and longitude. In spacetime, a coordinate grid that spans the 3+1 dimensions locates "events" (rather than just points in space), so time is added as another dimension to the grid. This way, you have where and when something is. Unlike in normal spatial coordinates, there are restrictions for how measurements can be made spatially and temporally. These restrictions correspond roughly to a particular mathematical model which differs from Euclidean space in its manifest symmetry.

Formerly, from experiments at slow speeds, time was believed to be independent of motion, progressing at a fixed rate in all reference frames; however, later high-speed experiments revealed that time slowed down at higher speeds (with such slowing called "time dilation" explained in the theory of "special relativity" ). Many experiments have confirmed time dilation, such as atomic clocks onboard a Space Shuttle running slower than synchronized Earth-bound inertial clocks and the relativistic decay of muons fromcosmic ray showers. The duration of time can therefore vary for various events and variousreference frames.

When dimensions are understood as mere components of the grid system, rather than physical attributes of space, it is easier to understand the alternate dimensional views as being simply the result of coordinate transformations.

The term spacetime has taken on a generalized meaning beyond treating spacetime events with the normal 3+1 dimensions (including time). Other proposed spacetime theories include additional dimensions -- normally spatial but there exist some speculative theories that include additional temporal dimensions and even some that include dimensions that are neither temporal nor spatial. How many dimensions are needed to describe the universe is still an open question. Speculative theories such as string theorypredict 10 or 26 dimensions (with M-theory predicting 11 dimensions: 10 spatial and 1 temporal), but the existence of more than four dimensions would only appear to make a difference at the subatomic level.


 


Historical origin

After discovering quaternionsWilliam Rowan Hamilton commented, "Time is said to have only one dimension, and space to have three dimensions. ... The mathematical quaternion partakes of both these elements; in technical language it may be said to be 'time plus space', or 'space plus time': and in this sense it has, or at least involves a reference to, four dimensions. And how the One of Time, of Space the Three, Might in the Chain of Symbols girdled be." Lorentz discovered some invariances of Maxwell's equations late in the 19th century which were to become the basis of Einstein's theory of special relativity. Fiction authors were also in on the game: Edgar Allan Poe stated in his essay on cosmology titledEureka (1848) that "Space and duration are one." This is the first known published work suggesting this connection between space and time, Poe reaching this conclusion after approximately 90 pages of philosophical reasoning. In 1895, in his novel The Time MachineH.G. Wells wrote, "There is no difference between time and any of the three dimensions of space except that our consciousness moves along it." He added, "Viking people…know very well that time is only a kind of space." It has always been the case that time and space are measured using real numbers, and the suggestion that the dimensions of space and time could be switched could have been raised by the first people to have formalized physics, but ultimately, the contradictions between Maxwell's laws and Galilean relativity had to come to a head before the idea of spacetime was ready to become mainstream.

While spacetime can be viewed as a consequence of Albert Einstein's 1905 theory ofspecial relativity, it was first explicitly proposed mathematically by one of his teachers, the mathematician Hermann Minkowski, in a 1908 essay[1] building on and extending Einstein's work. His concept of Minkowski space is the earliest treatment of space and time as two aspects of a unified whole, the essence of special relativity. The idea of Minkowski space also led to special relativity being viewed in a more geometrical way, this geometric viewpoint of spacetime being important in general relativity too. (For an English translation of Minkowski's article, see Lorentz et al. 1952.) The 1926 thirteenth edition of the Encyclopedia Britannica included an article by Einstein titled "Space-Time".[2]



Basic concepts

Spacetimes are the arenas in which all physical events take place—an event is a point in spacetime specified by its time and place. For example, the motion of planets around thesun may be described in a particular type of spacetime, or the motion of light around a rotating star may be described in another type of spacetime. The basic elements of spacetime are events. In any given spacetime, an event is a unique position at a unique time. Examples of events include the explosion of a star or the single beat of a drum.


A spacetime is independent of any observer.[3] However, in describing physical phenomena (which occur at certain moments of time in a given region of space), each observer chooses a convenient coordinate system. Events are specified by four real numbers in any coordinate system. The worldline of a particle or light beam is the path that this particle or beam takes in the spacetime and represents the history of the particle or beam. The worldline of the orbit of the earth is depicted in two spatial dimensions x and y (the plane of the earth's orbit) and a time dimension orthogonal to x and y. The orbit of the earth is an ellipse in space alone, but its worldline is a helix in spacetime.

The unification of space and time is exemplified by the common practice of expressing distance in units of time, by dividing the distance measurement by the speed of light.



Space-time intervals

Spacetime entails a new concept of distance. Whereas distances in Euclidean spaces are entirely spatial and always positive, in special relativity, the concept of distance is quantified in terms of the space-time interval between two events, which occur in two locations at two times:

s^2 = c^2Delta t^2 - Delta r^2,   (spacetime interval),

where:

c is the speed of light, Δt and Δr denote differences of the time and space coordinates, respectively, between the events.

(Note that the choice of signs for s2 above follows the Landau-Lifshitz spacelike convention. Other treatments reverse the sign of s2.)

Space-time intervals may be classified into three distinct types based on whether the temporal separation (c2Δt2) or the spatial separation (Δr2) of the two events is greater.

Certain types of worldlines (called geodesics of the spacetime) are the shortest paths between any two events, with distance being defined in terms of spacetime intervals. The concept of geodesics becomes critical in general relativity, since geodesic motion may be thought of as "pure motion" (inertial motion) in spacetime, that is, free from any external influences.



 Time-like intervalbegin{align}    c^2Delta t^2 &> Delta r^2              s^2 &> 0  end{align}

For two events separated by a time-like interval, enough time passes between them for there to be a cause-effect relationship between the two events. For a particle traveling at less than the speed of light, any two events which occur to or by the particle must be separated by a time-like interval. Event pairs with time-like separation define a positive squared spacetime interval (s2 > 0) and may be said to occur in each other's future or past.

The measure of a time-like spacetime interval is described by the proper time:

Deltatau = sqrt{Delta t^2 - frac{Delta r^2}{c^2}}   (proper time).

The proper time interval would be measured by an observer with a clock traveling between the two events in an inertial reference frame, when the observer's path intersects each event as that event occurs. (The proper time defines a real number, since the interior of the square root is positive.)


 Light-like interval
begin{align}  c^2Delta t^2 &= Delta r^2             s^2 &= 0  end{align}

In a light-like interval, the spatial distance between two events is exactly balanced by the time between the two events. The events define a squared spacetime interval of zero (s2 = 0).

Events which occur to or by a photon along its path (i.e., while travelling at c, the speed of light) all have light-like separation. Given one event, all those events which follow at light-like intervals define the propagation of a light cone, and all the events which preceded from a light-like interval define a second light cone.


 Space-like intervalbegin{align}    c^2Delta t^2 &< Delta r^2              s^2 &< 0  end{align}

When a space-like interval separates two events, not enough time passes between their occurrences for there to exist a causal relationship crossing the spatial distance between the two events at the speed of light or slower. Generally, the events are considered not to occur in each other's future or past. There exists a reference frame such that the two events are observed to occur at the same time.

For these space-like event pairs with a negative squared spacetime interval (s2 < 0), the measurement of space-like separation is the proper distance:

Deltasigma = sqrt{Delta r^2 - c^2Delta t^2}   (proper distance).

Like the proper time of time-like intervals, the proper distance (Δσ) of space-like spacetime intervals is a real number value.


Mathematics of spacetimes

For physical reasons, a spacetime continuum is mathematically defined as a four-dimensional, smooth, connected Lorentzian manifold (M,g). This means the smoothLorentz metric g has signature (3,1). The metric determines the geometry of spacetime, as well as determining the geodesics of particles and light beams. About each point (event) on this manifold, coordinate charts are used to represent observers in reference frames. Usually, Cartesian coordinates (x,y,z,t) are used. Moreover, for simplicity's sake, the speed of light c is usually assumed to be unity.

A reference frame (observer) can be identified with one of these coordinate charts; any such observer can describe any event p. Another reference frame may be identified by a second coordinate chart about p. Two observers (one in each reference frame) may describe the same event p but obtain different descriptions.

Usually, many overlapping coordinate charts are needed to cover a manifold. Given two coordinate charts, one containing p (representing an observer) and another containing q(representing another observer), the intersection of the charts represents the region of spacetime in which both observers can measure physical quantities and hence compare results. The relation between the two sets of measurements is given by a non-singularcoordinate transformation on this intersection. The idea of coordinate charts as local observers who can perform measurements in their vicinity also makes good physical sense, as this is how one actually collects physical data—locally.

For example, two observers, one of whom is on Earth, but the other one who is on a fast rocket to Jupiter, may observe a comet crashing into Jupiter (this is the event p). In general, they will disagree about the exact location and timing of this impact, i.e., they will have different 4-tuples (x,y,z,t) (as they are using different coordinate systems). Although their kinematic descriptions will differ, dynamical (physical) laws, such as momentum conservation and the first law of thermodynamics, will still hold. In fact, relativity theory requires more than this in the sense that it stipulates these (and all other physical) laws must take the same form in all coordinate systems. This introduces tensors into relativity, by which all physical quantities are represented.

Geodesics are said to be time-like, null, or space-like if the tangent vector to one point of the geodesic is of this nature. The paths of particles and light beams in spacetime are represented by time-like and null (light-like) geodesics (respectively).


 Topology

The assumptions contained in the definition of a spacetime are usually justified by the following considerations.

The connectedness assumption serves two main purposes. First, different observers making measurements (represented by coordinate charts) should be able to compare their observations on the non-empty intersection of the charts. If the connectedness assumption were dropped, this would not be possible. Second, for a manifold, the properties of connectedness and path-connectedness are equivalent and, one requires the existence of paths (in particular, geodesics) in the spacetime to represent the motion of particles and radiation.

Every spacetime is paracompact. This property, allied with the smoothness of the spacetime, gives rise to a smooth linear connection, an important structure in general relativity. Some important theorems on constructing spacetimes from compact and non-compact manifolds include the following:[citations needed]

  • compact manifold can be turned into a spacetime if, and only if, its Euler characteristic is 0.
  • Any non-compact 4-manifold can be turned into a spacetime.

 

Spacetime symmetries

Often in relativity, spacetimes that have some form of symmetry are studied. As well as helping to classify spacetimes, these symmetries usually serve as a simplifying assumption in specialised work. Some of the most popular ones include:

 


 Causal structure

The causal structure of a spacetime describes causal relationships between pairs of points in the spacetime based on the existence of certain types of curves joining the points.


 Spacetime in special relativity

The geometry of spacetime in special relativity is described by the Minkowski metric on R4. This spacetime is called Minkowski space. The Minkowski metric is usually denoted by η and can be written as a four-by-four matrix:

eta_{ab} , = operatorname{diag}(1, -1, -1, -1)

where the Landau-Lifshitz spacelike convention is being used. A basic assumption of relativity is that coordinate transformations must leave spacetime intervals invariant. Intervals are invariant under Lorentz transformations. This invariance property leads to the use of four-vectors (and other tensors) in describing physics.

Strictly speaking, one can also consider events in Newtonian physics as a single spacetime. This is Galilean-Newtonian relativity, and the coordinate systems are related byGalilean transformations. However, since these preserve spatial and temporal distances independently, such a spacetime can be decomposed into spatial coordinates plus temporal coordinates, which is not possible in the general case.


Spacetime in general relativity

In general relativity, it is assumed that spacetime is curved by the presence of matter (energy), this curvature being represented by the Riemann tensor. In special relativity, the Riemann tensor is identically zero, and so this concept of "non-curvedness" is sometimes expressed by the statement Minkowski spacetime is flat.

Many spacetime continua have physical interpretations which most physicists would consider bizarre or unsettling. For example, a compact spacetime has closed, time-like curves, which violate our usual ideas of causality (that is, future events could affect past ones). For this reason, mathematical physicists usually consider only restricted subsets of all the possible spacetimes. One way to do this is to study "realistic" solutions of the equations of general relativity. Another way is to add some additional "physically reasonable" but still fairly general geometric restrictions and try to prove interesting things about the resulting spacetimes. The latter approach has led to some important results, most notably the Penrose-Hawking singularity theorems.



Quantized spacetime

In general relativity, spacetime is assumed to be smooth and continuous—and not just in the mathematical sense. In the theory of quantum mechanics, there is an inherent discreteness present in physics. In attempting to reconcile these two theories, it is sometimes postulated that spacetime should be quantized at the very smallest scales. Current theory is focused on the nature of spacetime at the Planck scaleCausal sets,loop quantum gravitystring theory, and black hole thermodynamics all predict a quantizedspacetime with agreement on the order of magnitude. Loop quantum gravity makes precise predictions about the geometry of spacetime at the Planck scale.


Privileged character of 3+1 spacetime

Reasoning about spacetime is always limited by the scientific evidence and techology available at the time of writing. For example, in the latter 20th century, experiments withparticle accelerators revealed that protons gained mass when accelerated to high speeds, and the time required for particle decay and other physical phenomena rose. Special relativity predicts this. Authors writing before Einstein's discovery of special relativity were unaware of these facts, so that their views were often mistaken, even fanciful.[citation needed]

Dimensions are of two kinds: spatial (bidirectional) and temporal (unidirectional). Only time has an arrow. Let the number of spatial dimensions be N and the number of temporal dimensions be T. That spacetime, ignoring any as yet undetectable compactified dimensions, consists of N=3 and T=1 can then be explained by appealing to the physical consequences of letting N differ from 3 and T differ from 1. The argument is often of ananthropic character.

Immanuel Kant argued that 3-dimensional space was a consequence of the inverse squarelaw of universal gravitation. While Kant's argument is historically important, John D. Barrowsays of it that "we would regard this as getting the punch-line back to front: it is the three-dimensionality of space that explains why we see inverse-square force laws in Nature, not vice-versa" (Barrow 2002). This is because the law of gravitation (or any other inverse-square law) follows from the concept of flux, from N=3, and from 3-dimensional solid objects having surface areas proportional to the square of their size in a selected spatial dimension. In particular, a sphere of radius r has area of 4πr2. More generally, in a space of N dimensions, the strength of the gravitational attraction between two bodies separated by a distance of r would be inversely proportional to rN-1.

Fixing T= 1 and letting N>3, Paul Ehrenfest showed in 1920 that the orbit of a planet about its sun cannot remain stable. The same is true of a star's orbit around the center of itsgalaxy.[4] Likewise, F. R. Tangherlini showed in 1963 that when N>3, electrons would not form stable orbitals around nuclei; they would either fall into the nucleus or disperse. Ehrenfest also showed that if N is even, then the different parts of a wave impulse will travel at different speeds. If N is odd and greater than 3, then wave impulses become distorted. Only when N=3 or 1 are both problems avoided.

Max Tegmark expands on the preceding argument in the following anthropic manner.[5] If T differs from 1, the behavior of physical systems could not be predicted reliably from knowledge of the relevant partial differential equations. In such a universe, intelligent life capable of manipulating technology could not emerge. Moreover, if T>1, Tegmark maintains that protons and electrons would be unstable and could decay into particles having greater mass than themselves (this is not a problem if the particles have a sufficiently low temperature). If N>3, Ehrenfest's argument above holds; atoms as we know them (and probably more complex structures as well) could not exist. If N<3, gravitation of any kind becomes problematic, and the universe is probably too simple to contain observers. For example, when N<3, nerves cannot overlap without intersecting.

In general, it is not clear how physical laws could operate if T differed from 1. If T>1, subatomic particles which decay after a fixed period would not behave predictably, because time-like geodesics would not be necessarily maximal.[6] N=1 and T=3 has the peculiar property that the speed of light in a vacuum is a lower bound on the velocity of matter.

Hence anthropic and other arguments rule out all cases except 3 spatial and 1 temporal dimensions—which happens to describe the world about us. Curiously, 3- and 4-dimensional spaces have the richest and most difficult geometry and topology. There are, for example, geometric statements whose truth or falsity is known for all N except one or both of 3 and 4. N=3 was the last case of the Poincare conjecture to be proved.

For a more detailed introduction to the privileged status of 3 spatial and 1 temporal dimensions, see Barrow;[7] for a deeper treatment, see Barrow and Tipler.[8] Barrow has repeatedly cited the work of Gerald Whitrow.[9]

String theory builds on the notion that the "universe is wiggly" and hypothesizes that matter and energy are composed of tiny vibrating strings of various types, most of which are embedded in dimensions that exist only on a scale no larger than the Planck length. Hence string theory is not constrained by N=3 and T=1, and coordinate grids having 10, and even as many 26, dimensions are used to describe the types and locations of the vibrating strings that theory hypothesizes.


References


 

 

 
 
Bugün 1 ziyaretçi (6 klik) kişi burdaydı!
Bu web sitesi ücretsiz olarak Bedava-Sitem.com ile oluşturulmuştur. Siz de kendi web sitenizi kurmak ister misiniz?
Ücretsiz kaydol